|
|
| The computer says no response from RCX tower. |
| (4 ) |
100%
0%
|
Cause: Tower is not plugged in.
Solution: Plug tower into computer.
Cause: Tower was moved during download.
Solution: Make sure tower does not move at all during download.
Cause: RCX lost power and has to download Firmware.
Solution: ROBOLAB will ask if you want to download the Firmware if this is the case. Note that the Firmware can take 5 to 10 minutes to download and if either the Tower or RCX are moved even a little, the download has to start all over again. Also, if using a laptop, it probably needs to be plugged into an AC power supply because the battery can not provide uninterrupted power for 5 minutes straight.
ses
|
