<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
	<channel>
	<title>LEGO Engineering - Hardware</title>
	<link>http://www.legoengineering.com/knowledgemanager</link>
	<description />
	<language>en-us</language>
	<copyright>http://www.legoengineering.com/knowledgemanager</copyright>
	<generator>ActiveKB NX</generator>
	<webMaster>knowledgebase@legoengineering.com</webMaster>
	<lastBuildDate>Thu, 23 May 2013 08:51:36 CDT</lastBuildDate>
	<ttl>20</ttl>
	<item>
		<title>My motors / wheels fall off when I drive my car.</title>
		<link>http://www.legoengineering.com/knowledgemanager/questions/44/</link>
		<description>Cause: The car in the picture below has only the motors attached to the bottom of the RCX. It is possible that the car will be able to remain at rest on its own, but as soon as it starts moving th ...</description>
		<author>LEGOengineering KnowledgeBase</author>
		<pubDate>Fri, 23 Apr 2010 18:42:03 GMT</pubDate>
	</item>
	<item>
		<title>My wheels spin, but the car does not move.</title>
		<link>http://www.legoengineering.com/knowledgemanager/questions/28/</link>
		<description>If the wheels are not touching the ground, use bigger wheels or move the motors and axles down.The wheels could be going too fast for their own good. They spin too fast to be able to catch the sur ...</description>
		<author>LEGOengineering KnowledgeBase</author>
		<pubDate>Fri, 23 Apr 2010 18:40:39 GMT</pubDate>
	</item>
	<item>
		<title>I used the gears with spikes (crown gears), and everything shakes.</title>
		<link>http://www.legoengineering.com/knowledgemanager/questions/43/</link>
		<description>
Problem: Crown gear does not run smoothly.Cause: This may be because the horizontal crown gear is resting directly on top of the vertical gear. In other words, the weight of the horizontal crown ...</description>
		<author>LEGOengineering KnowledgeBase</author>
		<pubDate>Fri, 23 Apr 2010 03:36:45 GMT</pubDate>
	</item>
	<item>
		<title>My car is driving backwards.</title>
		<link>http://www.legoengineering.com/knowledgemanager/questions/27/</link>
		<description>If the car is driving in the wrong direction, you know that the wheels are turning in the direction that the program tells them to.Change the direction of both motor inputs or the direction of the ...</description>
		<author>LEGOengineering KnowledgeBase</author>
		<pubDate>Fri, 23 Apr 2010 03:36:26 GMT</pubDate>
	</item>
	<item>
		<title>My car falls or tips backwards when I drive.</title>
		<link>http://www.legoengineering.com/knowledgemanager/questions/25/</link>
		<description>If the car tips forward or backwards when driven, the car  might not be not balanced well.  If the front of  the car pops up when it is driven forward it is too heavy in the back or  too light in  ...</description>
		<author>LEGOengineering KnowledgeBase</author>
		<pubDate>Fri, 23 Apr 2010 03:10:59 GMT</pubDate>
	</item>
	<item>
		<title>My car drives, but not straight.</title>
		<link>http://www.legoengineering.com/knowledgemanager/questions/26/</link>
		<description>Potential causes:The motors are on different power levels.The wheels are not lined up properly (height).The wheels may be bent.Each pair of wheels has the same two wheels.The gears are not lined u ...</description>
		<author>LEGOengineering KnowledgeBase</author>
		<pubDate>Wed, 21 Apr 2010 19:00:39 GMT</pubDate>
	</item>
	</channel>
</rss>
