LEGO Engineering ::

( 5 8) «« | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | | »»

Why does my NXT display "File Error!" when I try to run a ROBOLAB prog... []
If your NXT accepts (downloads) programs from ROBOLAB but then displays "File Error!" when you try to run them, you might have a mismatch between NXT fi
How do I run the Mindstorms NXT (NXT-G) 1.0 software on Windows Vista? []
The Mindstorms NXT 1.0 software will work on Windows Vista if you follow the instructions below. There are a few limitations, but please remember that t
In NXT-G, how can I split a program into more than the 3 task lines or 'bea... []
This is done simply by holding down the 'shift' key and clicking on any part of the beam. This should grow a new extension that you can use for your var
What are some possible uses for the NXT light sensor? How do I program it in NXT... []
The NXT light sensor is primarily used to gather information about the light levels in the environment around the robot. A few ideas for projects that incorporate the light sensor are: 1) Fo
My NXT is frozen and I can't reload the firmware (I'm using NXT-G)! (A... []
LEGO Mindstorms NXT Firmware Verfahren zum Herunterladen:
Installing ROBOLAB on Windows 7 []
1. Look in your ROBOLAB Progam Files directory (where the .exe file is) for the "Tower Drivers" folder. 2. Inside the folder, find a file called "S
Do I need a computer for each RCX or NXT? []
No. You can have unlimited groups working with RCXs or NXTs using the same computer. Of course, to maintain sanity, it is suggested to not have more tha
My NXT is frozen and I can't reload the firmware (I'm using NXT-G)! []
Make sure the LEGO MINDSTORMS NXT is connected directly to the computer using a USB cable (a Bluetooth connection will not work).
How does NXT motor synchronizing work in ROBOLAB? []
To synchronize motors means to have them move in lock-step with one another. One motor is the controller (or driver), and one other motor is the followe
I can’t figure out what threshold values I should use for my light or sound se... []
Place your sensor in the light or noise environment that it will experience while the program is running. T
My IR tower and RCX are not communicating. What should I do? []
Here is a list of things to try if you are having problems downloading to your RCX.
Can I install and run ROBOLAB on Windows Vista? []
ROBOLAB 2.5.4* *ROBOLAB 2.5.4 has not been tested under the 64-bit versi
What are the limitations on Windows Vista? []
Some files are virtualized under LEGO Software so they may be hard to find in Windows Explorer. Because files are virtualized in Windows Vist
What kind of batteries should I use in the RCX or NXT? []
- First of all, note that there are AC adapters available for both the RCX and NXT, so if you are building creations that can handle an
The power settings I have programmed in ROBOLAB are not the same as the settings... []
...e ROBOLAB software allows for settings of 1 to 5. The RCX has 100 speed settings using RoboLab 2.9 firmware (usi
My HiTechnic acceleration sensor doesn't work with ROBOLAB. []
There is an issue with using the HiTechnic acceleration sensors with the ROBOLAB firmware. The sensor does work with ROBOLAB, but only when you do not u
Why would I need to use logic inputs and outputs in NXT-G? What is an example of... []
The logic block in NXT-G is essentially used to combine two or more true/false signals into one true/false value. For instance, you can have a motor cha
What is the File Access block for? []
This block (located in the 'Advanced' section in the 'complete palette' tab on the left side of the screen) is used to write and read files on the NXT.
Which versions of Windows Vista are supported? []
LEGO Mindstorms NXT software will not install or run correctly on 64-bit versions of Windows Vista. LEGO Mindstorms NXT Softw
Does ROBOLAB run on Linux? []
Yes and No. ROBOLAB is only officially supported and tested on a the PC an Mac platforms. There is no official support for ROBOLAB running on

( 5 8) «« | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | | »»